CoREZYN® COR75-AQ-010L Datasheet
Vinyl Ester
Supplied by Interplastic Corporation
View Complete Data Sheet Search 119000+ Data Sheets
| Product Description | ||||
|
CoREZYN® isophthalic resins are suitable for a wide range of conventional FRP/GRP applications. They are premium-grade, high-molecular weight, thermosetting resins formulated specifically for their physical and corrosion resistance properties.
For optimum performance and corrosion resistance, Interplastic uses the more exacting and expensive two-stage reaction for manufacturing its isophthalic resins. This process yields the best possible average molecular weight and molecular-weight distribution. In addition, the carefully designed mole ratios in these resins offer a significant improvement over conventional industry standards. CoREZYN isophthalic resins deliver superior performance, resulting from an optimum balance of reaction technique, esterification to a high molecular weight, and mole ratio of unsaturated acid to aromatic acid. All of these resins have the same isophthalic "backbone" that gives them their corrosion resistant properties. Variations in the individual resin formulations result in a range of properties that provide different functional characteristics. This permits a great deal of versatility in finished-product formulation, while maintaining high corrosion resistance and physical properties. |
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
Appearance
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
|
|
Styrene Content
|
|
%
|
|
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Modulus (0.126 in, Cast)
|
|
psi
|
ASTM D638 |
|
Tensile Strength (0.126 in, Cast)
|
|
psi
|
ASTM D638 |
|
Tensile Elongation (Break, 0.126 in, Cast)
|
|
%
|
ASTM D638 |
|
Flexural Modulus (0.126 in, Cast)
|
|
psi
|
ASTM D790 |
|
Flexural Strength (0.126 in, Cast)
|
|
psi
|
ASTM D790 |
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Barcol Hardness (0.126 in)
|
|
|
ASTM D2583 |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Heat Deflection Temperature (0.13 in)
|
|
°F
|
ASTM D648 |
| Additional Information |
Nominal Value
|
Unit
|
Test Method
|
|
Gel to Peak
|
|
min
|
|
|
Non-Volatile Content
|
|
%
|
|
|
Peak Exotherm
|
|
°F
|
|
|
Thixotropic Index
|
|
|
|
| Features | |||
|
Features may also be described by the following terms: High Molecular Weight, High MW, Good Corrosion Resistance, Corrosion Resistant.
|
|||
| Available Documents | |||
|
Technical Datasheet (English)
|
|||
| Uncured Properties |
Nominal Value
|
Unit
|
Test Method
|
|
Viscosity 2 (77°F, Brookfield HBT)
|
|
Pa·s
|
|
|
Gel Time 3 (77°F)
|
|
min
|
|
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
| 2#3 spindle 60 rpm |
| 31cc of 50% MEKP gel time; 100 gram mass |
|
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |